THRUST AND PRESSURE
Have you ever wondered why a camel can run in a desert easily? Why an army tank weighing more than a thousand tonne rests upon a continuous chain? Why a truck or a motorbus has much wider tyres?
Why cutting tools have sharp edges? In order to address these questions and understand the phenomena involved, it helps to introduce the concepts of the net force in a particular direction (thrust) and the force per unit area (pressure) acting on the object concerned.
Let us try to understand the meanings of thrust and pressure by considering the following situations:
Situation 1: You wish to fix a poster on a bulletin board, as shown in Fig 10.3. To do this task you will have to press drawing pins with your thumb.
You apply a force on the surface area of the head of the pin. This force is directed perpendicular to the surface area of the board. This force acts on a smaller area at the tip of the pin.
Situation 2 : You stand on loose sand. Your feet go deep into the sand. Now, lie down on the sand. You will find that your body will not go that deep in the sand. In both cases the force exerted on the sand is the weight of your body.
You have learnt that weight is the force acting vertically downwards. Here the force is acting perpendicular to the surface of the sand. The force acting on an object perpendicular to the surface is called thrust.
When you stand on loose sand, the force, that is, the weight of your body is acting on an area equal to area of your feet. When you lie down, the same force acts on an area equal to the contact area of your whole body, which is larger than the area of your feet.
Thus, the effects of forces of the same magnitude on different areas are different. In the above cases, thrust is the same. But effects are different. Therefore the effect of thrust depends on the area on which it acts.
The effect of thrust on sand is larger while standing than while lying. The thrust on unit area is called pressure. Thus,
Pressure ` = text( thrust)/text(area)` .....(10.20)
Substituting the SI unit of thrust and area in Eq. (10.20), we get the SI unit of pressure as `N//m^2` or `N m^(–2)`.
In honour of scientist Blaise Pascal, the SI unit of pressure is called pascal, denoted as Pa.
Let us consider a numerical example to understand the effects of thrust acting on different areas.
Thus, the same force acting on a smaller area exerts a larger pressure, and a smaller pressure on a larger area. This is the reason why a nail has a pointed tip, knives have sharp edges and buildings have wide foundations.
`ul"PRESSURE IN FLUIDS"`
All liquids and gases are fluids. A solid exerts pressure on a surface due to its weight. Similarly, fluids have weight, and they also
Similarly, fluids have weight, and they also
`ul" BUOYANCY"`
Have you ever had a swim in a pool and felt lighter? Have you ever drawn water from a well and felt that the bucket of water is heavier when it is out of the water? Have you ever wondered why a ship made of iron and steel does not sink in sea water, but whether the same amount of iron and steel in the form of a sheet would sink? These questions can be answered by taking buoyancy in consideration. Let us understand the meaning of buoyancy by doing an activity.
The force due to the gravitational attraction of the earth acts on the bottle in the downward direction. So the bottle is pulled downwards. But the water exerts an upward force on the bottle.
Thus, the bottle is pushed upwards. We have learnt that weight of an object is the force due to gravitational attraction of the earth.
When the bottle is immersed, the upward force exerted by the water on the bottle is greater than its weight. Therefore it rises up when released.
To keep the bottle completely immersed, the upward force on the bottle due to water must be balanced. This can be achieved by an externally applied force acting downwards.
This force must at least be equal to the difference between the upward force and the weight of the bottle.
The upward force exerted by the water on the bottle is known as upthrust or buoyant force. In fact, all objects experience a force of buoyancy when they are immersed in a fluid. The magnitude of this buoyant force depends on the density of the fluid.
`bbul" WHY OBJECTS FLOAT OR SINK WHEN PLACED ON THE SURFACE OF WATER?"`
Let us do the following activities to arrive at an answer for the above question.
The nail sinks. The force due to the gravitational attraction of the earth on the iron nail pulls it downwards. There is an upthrust of water on the nail, which pushes it upwards.
But the downward force acting on the nail is greater than the upthrust of water on the nail. So it sinks (Fig. 10.5).
The cork floats while the nail sinks. This happens because of the difference in their densities. The density of a substance is defined as the mass per unit volume.
The density of cork is less than the density of water. This means that the upthrust of water on the cork is greater than the weight of the cork. So it floats (Fig. 10.5).
The density of an iron nail is more than the density of water. This means that the upthrust of water on the iron nail is less than the weight of the nail. So it sinks.
Therefore objects of density less than that of a liquid float on the liquid. The objects of density greater than that of a liquid sink in the liquid.
Why cutting tools have sharp edges? In order to address these questions and understand the phenomena involved, it helps to introduce the concepts of the net force in a particular direction (thrust) and the force per unit area (pressure) acting on the object concerned.
Let us try to understand the meanings of thrust and pressure by considering the following situations:
Situation 1: You wish to fix a poster on a bulletin board, as shown in Fig 10.3. To do this task you will have to press drawing pins with your thumb.
You apply a force on the surface area of the head of the pin. This force is directed perpendicular to the surface area of the board. This force acts on a smaller area at the tip of the pin.
Situation 2 : You stand on loose sand. Your feet go deep into the sand. Now, lie down on the sand. You will find that your body will not go that deep in the sand. In both cases the force exerted on the sand is the weight of your body.
You have learnt that weight is the force acting vertically downwards. Here the force is acting perpendicular to the surface of the sand. The force acting on an object perpendicular to the surface is called thrust.
When you stand on loose sand, the force, that is, the weight of your body is acting on an area equal to area of your feet. When you lie down, the same force acts on an area equal to the contact area of your whole body, which is larger than the area of your feet.
Thus, the effects of forces of the same magnitude on different areas are different. In the above cases, thrust is the same. But effects are different. Therefore the effect of thrust depends on the area on which it acts.
The effect of thrust on sand is larger while standing than while lying. The thrust on unit area is called pressure. Thus,
Pressure ` = text( thrust)/text(area)` .....(10.20)
Substituting the SI unit of thrust and area in Eq. (10.20), we get the SI unit of pressure as `N//m^2` or `N m^(–2)`.
In honour of scientist Blaise Pascal, the SI unit of pressure is called pascal, denoted as Pa.
Let us consider a numerical example to understand the effects of thrust acting on different areas.
Thus, the same force acting on a smaller area exerts a larger pressure, and a smaller pressure on a larger area. This is the reason why a nail has a pointed tip, knives have sharp edges and buildings have wide foundations.
`ul"PRESSURE IN FLUIDS"`
All liquids and gases are fluids. A solid exerts pressure on a surface due to its weight. Similarly, fluids have weight, and they also
Similarly, fluids have weight, and they also
`ul" BUOYANCY"`
Have you ever had a swim in a pool and felt lighter? Have you ever drawn water from a well and felt that the bucket of water is heavier when it is out of the water? Have you ever wondered why a ship made of iron and steel does not sink in sea water, but whether the same amount of iron and steel in the form of a sheet would sink? These questions can be answered by taking buoyancy in consideration. Let us understand the meaning of buoyancy by doing an activity.
Activity _____________`10.4`
♦ Take an empty plastic bottle. Close the mouth of the bottle with an airtight stopper. Put it in a bucket filled with water. You see that the bottle floats
♦ Push the bottle into the water. You feel an upward push. Try to push it further down. You will find it difficult to push deeper and deeper. This indicates that water exerts a force on the bottle in the upward direction. The upward force exerted by the water goes on increasing as the bottle is pushed deeper till it is completely immersed.
♦ Now, release the bottle. It bounces back to the surface.
♦ Does the force due to the gravitational attraction of the earth act on this bottle? If so, why doesn’t the bottle stay immersed in water after it is released? How can you immerse the bottle in water?
The force due to the gravitational attraction of the earth acts on the bottle in the downward direction. So the bottle is pulled downwards. But the water exerts an upward force on the bottle.
Thus, the bottle is pushed upwards. We have learnt that weight of an object is the force due to gravitational attraction of the earth.
When the bottle is immersed, the upward force exerted by the water on the bottle is greater than its weight. Therefore it rises up when released.
To keep the bottle completely immersed, the upward force on the bottle due to water must be balanced. This can be achieved by an externally applied force acting downwards.
This force must at least be equal to the difference between the upward force and the weight of the bottle.
The upward force exerted by the water on the bottle is known as upthrust or buoyant force. In fact, all objects experience a force of buoyancy when they are immersed in a fluid. The magnitude of this buoyant force depends on the density of the fluid.
`bbul" WHY OBJECTS FLOAT OR SINK WHEN PLACED ON THE SURFACE OF WATER?"`
Let us do the following activities to arrive at an answer for the above question.
Activity _____________`10.5`
♦ Take a beaker filled with water.
♦ Take an iron nail and place it on the surface of the water
♦ Observe what happens.
The nail sinks. The force due to the gravitational attraction of the earth on the iron nail pulls it downwards. There is an upthrust of water on the nail, which pushes it upwards.
But the downward force acting on the nail is greater than the upthrust of water on the nail. So it sinks (Fig. 10.5).
Activity _____________`10.6`
♦ Take a beaker filled with water.
♦ Take a piece of cork and an iron nail of equal mass.
♦ Place them on the surface of water.
♦ Observe what happens.
The cork floats while the nail sinks. This happens because of the difference in their densities. The density of a substance is defined as the mass per unit volume.
The density of cork is less than the density of water. This means that the upthrust of water on the cork is greater than the weight of the cork. So it floats (Fig. 10.5).
The density of an iron nail is more than the density of water. This means that the upthrust of water on the iron nail is less than the weight of the nail. So it sinks.
Therefore objects of density less than that of a liquid float on the liquid. The objects of density greater than that of a liquid sink in the liquid.
